The white layer on the rod will increase the electricity bill, remove it before heating the water, use these methods to get rid of the dust at home.
New Delhi. Winter season has knocked in India. In such a situation, people have now started needing hot water for bathing. There are many ways to make hot water. But, in common Indian homes only immersion rods are used. It is counted among the most economical methods. However, if you want the water to heat easily then it is important for the rod to be clean.
After using the immersion rod for a long time, the salt and calcium present in the water accumulates on the upper surface of the rod. This creates difficulty in heating water with the rod. Water does not heat quickly and electricity bills also become high. Some people try to remove it by scratching or banging it with a rod. However, due to this there remains a fear of damage to the immersion rod. In such a situation, here we are going to tell you about those methods by which you will be able to clean the rod easily at home.
Read this also: Big discount on Diwali, smart TVs of big brands are so cheap for the first time, sales are going on at a rapid pace
Vinegar will do the trick
Vinegar is generally used in homes for cooking. You can easily clean the immersion rodder by using vinegar. This cleaning will be done absolutely free for you. For this you will have to soak the rod in vinegar for 4 to 5 hours. This will cause the white layer on the rod to dissolve. Take a bucket and add vinegar to it and leave the rod soaked.
Take help of hydrogen peroxide
Hydrogen peroxide is not used in cooking. But, many household appliances can be cleaned easily with this. With this, the immersion rod also gets cleaned very easily. For this you will have to prepare a solution by adding 5 spoons of hydrogen peroxide in 1 or 2 liters of water. After this the rod will have to be soaked for 10 minutes and left. Later clean it by rubbing it with sandpaper.
first published : November 2, 2023, 5:03 pm IST